Many people want to know how Decorative marble fireplaces can be used better. First, check whether the damper of the fireplace is open. As a function of connecting with the outside air, the damper is directly related to the quality of indoor air. It is a device used to control the flow of air through the flue. Make sure that the damper is open so that the smoke will not flow back into the space, and it will be easier for ignition after opening. It is necessary to determine what kind of material the fireplace is used for the closed fireplace. Make sure the Decorative marble fireplaces are at room temperature before lighting. Because cold air is heavier than warm air, opening the fireplace will allow the warm air to form an updraft to top the cold air, preventing the backflow of the cold air.

Check for airflow. Light a match at the furnace wall opening or wall channel and observe whether the direction of the airflow rises or sinks. If it sinks, it will be difficult to ignite. It is necessary to find a smokeless kindling material to heat the furnace wall to help form an updraft. Matters needing attention when igniting. Decorative marble fireplaces manufacturers tell you to put the kindling under the grate first, and then put matches on the grate. Second, don't use too much newspaper. Best, lay out the matches. Ignite, set the igniter on fire. Pay attention to the smoke in the first half hour. Ventilate the windows a little, then add large pieces of wood. Finally, you can go out.
Decorative marble fireplaces are a good way of heating, but fireplaces still have certain dangers. You must use them correctly. You can refer to the above introduction for how to use them, and I will introduce them to you today.